What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
10.06.2025 02:40

This device then solves the entire problem.
Now when you have a certain ac resistance, then a current flows in a loop.
First Sentence:
Switzerland proposes forcing UBS to add $26bn in capital - Financial Times
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
The bolt then partially travels down the line to your home.
2024–10–14 [Omar Gharbi Omar Gharbi ]
PSG vs Inter: Opta Supercomputer Champions League Final Prediction - Opta Analyst
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
Why is only the left side of my vagina bleeding, on and off?
2024–10–10[John johnson John Johnson ]
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
He then asserts :
Is there a possibility that we are living in a simulation and that there is a concept of rebirth?
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
So, the voltage could go up to 500 volts, and the fuse will not open up.
President Trump kicked Zelensky out of the White House. Is it over for a deal?
[image of Common-mode choke]
Upvotes:
Barnstars:
Scientists just learned the age of America's deepest canyon - SFGATE
This is where the MOV conducts again, and dissipated the energy.
(Dc diagram shown, AC is similar).
a photo is worth a thousand words.
Opal Suchata Chuangsri from Thailand crowned Miss World 2025 - CNN
One is “what exactly is in a ‘surge protector’ ? ”
This one hit behind the barn.
Here is a simplified AC power diagram.
I post the exact comment here.
A circuit breaker is similar, but is resettable.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
Evan Engram embraces the “Joker” role in the Broncos’ offense - NBC Sports
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Because the load is inductive, the current lags the voltage.(by a bit).
It also is a device that limits the change in current flow.
This is where this question deviates from being a 'generic' question, and becomes more specific.
eight
When sharing a wife, is it best with your buddy or a stranger?
so, what happens?
but this device (an Inductor) … impedes the rapid changes in the current.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
One
The third is lightning and “how it gets conducted into a home.”
but I think this circuit , shows a few more pieces.
What is lightning?
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
There are three different concepts here that are getting confused.
Edit 2024–10.
At least they know the answer if they wanted it.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
These are simplified answers to the original question, and does not change anything I wrote above.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
[old diagram got deleted by accident]
There are two important concepts here.
An AC voltage/ current source, and an ac inductive load.
At one ohm, the resistor has a maximum of 1 watt power.
the problem then depends on "how fast does the fuse operate?".
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
These devices are installed between the “hot” and “neutral” and protective ground.
It seems Mohan does not understand the difference between a comment and an Answer.
This is 'the assistant's answer'
2024–10–16 [ OO OLAOYE OYEBODE ]
But it can get overloaded, and no longer works.
In schematic diagrams this is the symbol for a fuse:
For this case there are devices called Metal oxide varistors (MOV).
what exactly is a ‘surge’ protector?
A fuse is a non-resetable over current circuit protector.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
The MOV will conduct when the voltage exceeds 50% of line voltage.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
nine
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
The other is “what does a “fuse” do?”
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
What does a fuse do?
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
He then describes Rainy Season and Lightning.
He then describes the function of a fuse.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
But… the neutral is now “floating” because of the 1 ohm resistance.